GEEKVAPE Q Replacement Pods 2ml | Top Fill | All Ohms | 3 Pack

GEEKVAPE Q 2ml Top-Fill Pods – Only £8.99

Need fresh cartridges for your GEEKVAPE Q-series vape?

At Vape Now UK x CBD Farmacy, we stock the complete resistance selection of GEEKVAPE Q 2ml Top-Fill Replacement Pods, giving you four different ways to set up your compatible device.

3 × GEEKVAPE Q PODS – ONLY £8.99

Choose from:

🔥 0.4Ω – 25–30W – RDL

⚡ 0.6Ω – 18–25W – RDL

⭐ 0.8Ω – 12–18W – Loose MTL

🌿 1.2Ω – 8–12W – MTL

Every pod has its mesh coil already built inside, so there are no separate coils to purchase or install.

Each cartridge is:

2ml • Top Fill • Refillable • Integrated Mesh Coil

And at £8.99 for three, you're paying approximately:

£3.00 PER POD

📍 Vape Now UK x CBD Farmacy
234a Shaftesbury Avenue, London, WC2H 8EG

£8.99 • 3 Pack • All Ohms • Top Fill • Buy In Store • Central London Collection • Nationwide UK Delivery

What Are GEEKVAPE Q Pods?

The GEEKVAPE Q cartridge system is used across a growing range of compatible GEEKVAPE pod kits.

Instead of using an empty cartridge with a separate coil, the Q pod combines everything into one replaceable unit:

E-Liquid Reservoir + Mesh Coil + Mouthpiece

That keeps everyday maintenance straightforward.

Simply:

Fill → Allow to saturate → Insert → Vape

Once the built-in coil eventually reaches the end of its useful life, replace the complete cartridge.

There's:

No separate coil installation

No fiddly coil changing

No wondering which loose coil fits inside the pod

Just choose the correct resistance.

🔝 This Listing Is for the 2ml Top-Fill Version

GEEKVAPE has produced Q cartridges in different capacities and filling styles.

This listing is specifically for:

2ML TOP-FILL Q PODS

supplied in:

PACKS OF 3 FOR £8.99

The top-filling design makes everyday refilling straightforward, allowing access to the filling area from the upper section of the cartridge.

That means less handling compared with cartridges that require access to a lower side port.

For regular users, it's a simple setup:

Open → Fill → Close → Vape

💧 2ml Refillable Capacity

Each cartridge holds:

2ML OF E-LIQUID

These aren't disposable prefilled pods.

When your e-liquid runs out:

Refill the cartridge.

Continue using the same pod until the integrated mesh coil eventually needs replacing.

With:

3 PODS FOR £8.99

you can keep fresh replacements ready for when that happens.

⚡ Which GEEKVAPE Q Resistance Should I Choose?

We stock all four:

0.4Ω | 0.6Ω | 0.8Ω | 1.2Ω

The resistance changes how your vape feels.

You can understand the range with one simple rule:

Lower Ω = More Power + More Vapour + Warmer Draw

Higher Ω = Less Power + Less Vapour + Tighter Draw

So the Q family gives you everything from a more powerful RDL setup through to a traditional MTL pod vape.

🔥 GEEKVAPE Q 0.4Ω Pod

25–30W | RDL | Most Powerful

The 0.4Ω sits at the performance end of the Q cartridge family.

GEEKVAPE specifies:

25–30W

for this resistance.

It's intended for users who want noticeably more performance from a compatible Q-series device.

Expect:

More vapour

Warmer vapour

Looser airflow

Higher power

Stronger RDL character

Faster e-liquid consumption

Best suited to:

RDL – Restricted Direct-to-Lung

If your priority is getting the most vapour and warmth available from the Q pod range:

Choose 0.4Ω

⚠️ Check Your Device

The 0.4Ω cartridge requires a compatible Q-series device capable of operating appropriately in the 25–30W region.

Some Q devices have lower maximum outputs.

So don't assume that because a cartridge physically belongs to the Q family, every Q device can necessarily run the 0.4Ω at its full intended power.

If you're unsure, bring your device into our shop and we'll check.

⚡ GEEKVAPE Q 0.6Ω Pod

18–25W | RDL

The 0.6Ω brings the power down slightly while still providing a loose, vapour-focused experience.

GEEKVAPE specifies:

18–25W

This makes it an excellent choice for customers who want:

Good vapour production

Warm flavour

RDL-style inhale

Lower power than 0.4Ω

A more versatile everyday vape

Compared with the 0.4Ω, it's less aggressive while still staying firmly towards the open end of the Q range.

0.6Ω = the balanced RDL choice.

⭐ GEEKVAPE Q 0.8Ω Pod

12–18W | Loose MTL

The 0.8Ω moves the Q system towards mouth-to-lung vaping.

GEEKVAPE specifies:

12–18W

and positions it as a Loose MTL option.

Expect:

More restricted airflow

Moderate vapour

Lower wattage

Cooler vapour than 0.4Ω/0.6Ω

Good everyday flavour

It's a very useful middle ground for someone who doesn't want large RDL clouds but also doesn't want the tightest possible inhale.

0.8Ω = the everyday all-rounder for MTL users who like a little airflow.

🌿 GEEKVAPE Q 1.2Ω Pod

8–12W | Tight MTL

At the highest-resistance end of the Q cartridge family is:

1.2Ω

GEEKVAPE specifies:

8–12W

and positions it specifically for:

MTL – Mouth-to-Lung

Compared with the lower-resistance options, expect:

Tighter airflow

Smaller clouds

Cooler vapour

Low power consumption

Reduced battery demand

Traditional MTL characteristics

This is particularly attractive for customers using suitable 50/50 e-liquids and nicotine salts who don't want an airy vape.

1.2Ω = the tightest Q pod option.

📊 Which GEEKVAPE Q Pod Should I Buy?

Quick choice:

Most vapour → 0.4Ω

Balanced RDL → 0.6Ω

Loose MTL → 0.8Ω

Tight MTL → 1.2Ω

🆚 0.4Ω vs 0.6Ω

These are the two choices to look at if you prefer a more open vape.

0.4Ω

25–30W

More heat, more vapour and higher power.

0.6Ω

18–25W

Still RDL, but with less power and a more moderate everyday feel.

So:

Maximum Q performance → 0.4Ω

Balanced RDL → 0.6Ω

🆚 0.8Ω vs 1.2Ω

These sit towards the MTL side of the range.

0.8Ω

12–18W

Loose MTL with a little more airflow and vapour.

1.2Ω

8–12W

Tighter MTL with less vapour and lower power.

So:

More open MTL → 0.8Ω

Tighter MTL → 1.2Ω

⚡ Integrated Mesh Coil

Each Q cartridge already contains its heating coil.

NO SEPARATE COIL REQUIRED

That means your £8.99 pack gives you:

3 COMPLETE REPLACEMENT PODS

not three empty tanks that still require another purchase.

When one pod eventually reaches the end of its life:

Remove it

Fill a fresh cartridge

Allow it to saturate

Insert it into the device

and continue vaping.

🔥 Mesh Heating

The Q cartridges use a mesh heating structure.

Mesh provides a broad heating surface inside the cartridge, helping the e-liquid heat consistently rather than concentrating the heat into a small section of conventional wire.

For everyday use, the goal is:

Responsive heating

Consistent flavour

Smooth vapour

Reliable performance

The exact character then changes depending on whether you've selected the 0.4Ω, 0.6Ω, 0.8Ω or 1.2Ω pod.

💧 Which E-Liquid Should I Use?

Different resistances suit different vaping styles.

0.4Ω – 25–30W

A higher-powered RDL option. Generally better suited to lower nicotine strengths appropriate for the increased vapour production.

0.6Ω – 18–25W

RDL with slightly less power. Suitable for customers wanting good vapour without moving all the way to the 0.4Ω.

0.8Ω – 12–18W

Well suited to everyday pod vaping and compatible 50/50-style e-liquids and nicotine salts.

1.2Ω – 8–12W

Particularly well suited to 50/50 e-liquids and nic salts for tighter MTL vaping.

If you're unsure which liquid suits your resistance, ask us in store.

🔄 How to Use a Fresh Q Pod

When opening your new:

£8.99 3-PACK

don't immediately fill a completely dry cartridge and start vaping.

Instead:

1. Remove one fresh Q pod

2. Open the top filling section

3. Add your compatible e-liquid

4. Close it securely

5. Leave the cartridge for approximately 5–10 minutes

6. Insert it into your compatible Q device

7. Begin vaping

That initial wait allows the dry cotton around the mesh coil to absorb the e-liquid.

It can help prevent burning a brand-new pod prematurely.

🔄 When Should I Replace My GEEKVAPE Q Pod?

These cartridges are refillable.

You don't need a new one every time the 2ml reservoir is empty.

Refill it and continue using it.

Eventually you may notice:

• Burnt taste
• Flavour becoming noticeably weaker
• Reduced vapour
• Persistent unpleasant taste
• Wicking becoming inconsistent
• E-liquid around the coil becoming unusually dark
• Persistent leaking from an old or damaged cartridge

Those are signs that it may be time to move to one of the fresh cartridges in your pack.

Pod life depends on your:

E-liquid

Sweetness

Resistance

Power

and:

How frequently you vape

🔗 GEEKVAPE Q Pod Compatibility

Q cartridges are designed for compatible devices within the GEEKVAPE Q platform.

Current compatible examples include models such as:

GEEKVAPE Sonder Q

Sonder Q 2

Aegis Hero Q

Wenax Q Pro

Wenax Q Ultra

Wenax Q 2

and other compatible Q-series devices.

⚠️ Resistance Support Can Differ

Just because a device accepts Q cartridges doesn't mean every device has the same maximum wattage.

This is particularly important with:

0.4Ω – 25–30W

If your device doesn't provide enough output, another resistance may be more appropriate.

The newer Wenax Q 2, for example, supports 0.4Ω, 0.6Ω, 0.8Ω and 1.2Ω and reaches 30W.

Not sure?

Bring your:

GEEKVAPE device

or:

Existing Q cartridge

into our store and we'll help identify the correct option.

⚠️ Q Pods Are Not Universal GEEKVAPE Pods

GEEKVAPE produces several different cartridge and coil families.

Having:

GEEKVAPE

printed on your vape doesn't automatically mean it takes a Q cartridge.

This listing is specifically for:

GEEKVAPE Q CARTRIDGES

If your device uses another GEEKVAPE pod or coil platform, these may not fit.

Always check your model before ordering.

⭐ GEEKVAPE Q 2ml Top-Fill Pod Features

• Only £8.99
• 3 cartridges per pack
• Approximately £3.00 per pod
• 2ml capacity
• Top-fill design
• Refillable
• Integrated mesh coil
• No separate coil required
• 0.4Ω available
• 0.6Ω available
• 0.8Ω available
• 1.2Ω available
• RDL options
• Loose MTL option
• Tight MTL option
• Designed for compatible Q-series devices
• Central London collection
• Buy in store
• Online ordering
• Nationwide UK delivery

GEEKVAPE Q Pod Specifications

📦 What's in the Pack?

3 × GEEKVAPE Q 2ml Top-Fill Replacement Pods

Choose:

🔥 0.4Ω – 25–30W

⚡ 0.6Ω – 18–25W

⭐ 0.8Ω – 12–18W

🌿 1.2Ω – 8–12W

ONLY £8.99 PER 3-PACK

Approximately:

£3.00 PER POD

Device and e-liquid are sold separately.

📍 Buy GEEKVAPE Q Pods in Central London – £8.99

Need replacement Q pods today?

At Vape Now UK x CBD Farmacy, we stock:

0.4Ω ✓

0.6Ω ✓

0.8Ω ✓

1.2Ω ✓

3 PODS – ONLY £8.99

Visit:

Vape Now UK x CBD Farmacy

📍 234a Shaftesbury Avenue
London, WC2H 8EG

Our Central London store is convenient for customers around:

Covent Garden • Leicester Square • Soho • Tottenham Court Road • Holborn • Bloomsbury • Fitzrovia • Charing Cross • Piccadilly Circus • Oxford Street • West End

If your final Q cartridge has burnt out while you're working, shopping or visiting Central London, you can pick up a fresh 3-pack for £8.99 directly from us.

🔎 Looking for GEEKVAPE Q Pods Near Me?

This product page is built to help customers searching for:

GEEKVAPE Q pods near me

GEEKVAPE Q replacement pods London

GEEKVAPE Q 2ml pods

GEEKVAPE Q top fill pods

Sonder Q pods London

Wenax Q pods London

Wenax Q Pro replacement pods

Wenax Q Ultra pods

GEEKVAPE Q 0.4 pods

GEEKVAPE Q 0.6 pods

GEEKVAPE Q 0.8 pods

GEEKVAPE Q 1.2 pods

GEEKVAPE pods Central London

GEEKVAPE pods Covent Garden

GEEKVAPE pods Soho

GEEKVAPE pods Leicester Square

can find the complete range at:

Vape Now UK x CBD Farmacy

3 × 2ML TOP-FILL PODS – £8.99

🛍️ Buy Online & Collect GEEKVAPE Q Pods in London

Already know which resistance you use?

Choose:

0.4Ω | 0.6Ω | 0.8Ω | 1.2Ω

online and select Central London collection where available.

3 PODS – ONLY £8.99

Collect from:

Vape Now UK x CBD Farmacy
📍 234a Shaftesbury Avenue, London, WC2H 8EG

Ideal for customers around Covent Garden, Leicester Square, Soho, Tottenham Court Road and the wider West End.

🚚 Order GEEKVAPE Q Pods Online – UK Delivery

Not in London?

Order your GEEKVAPE Q 2ml top-fill replacement cartridges online for nationwide UK delivery.

Select:

0.4Ω • 0.6Ω • 0.8Ω • 1.2Ω

and receive:

3 × GEEKVAPE Q TOP-FILL PODS – £8.99

So whether you're collecting from our Central London store or ordering from elsewhere in the UK, you'll have access to the same complete resistance selection.

Why Buy GEEKVAPE Q Pods From Vape Now UK x CBD Farmacy?

A Q pod isn't just a Q pod.

Changing from 1.2Ω to 0.4Ω can completely change the way a compatible device feels.

That's why we stock:

ALL FOUR RESISTANCES

rather than expecting every customer to use whichever option happens to be available.

Choose:

0.4Ω for maximum Q performance

0.6Ω for balanced RDL

0.8Ω for loose MTL

or:

1.2Ω for tight MTL

And if you don't know which one is right for your device:

Bring your vape into store.

We'll help you identify it.

🔥 GEEKVAPE Q 2ml Top-Fill Pods – £8.99

🔥 0.4Ω – 25–30W – RDL

⚡ 0.6Ω – 18–25W – RDL

⭐ 0.8Ω – 12–18W – Loose MTL

🌿 1.2Ω – 8–12W – MTL

3 PODS – ONLY £8.99

2ml • Top Fill • Integrated Mesh Coil • All Ohms

📍 Vape Now UK x CBD Farmacy
234a Shaftesbury Avenue, London, WC2H 8EG

£8.99 in store & online • Central London collection • Nationwide UK delivery

🔞 Adult Vaping Product Notice

18+ in the UK: This vaping product is intended strictly for adults aged 18 and over in the UK.

These empty replacement cartridges themselves do not contain nicotine or e-liquid. If filled with nicotine-containing e-liquid, nicotine is an addictive substance and is not risk-free.

Minimum legal age requirements may differ internationally. Customers outside the UK should check the laws applicable in their country before purchasing.

Keep vaping products and nicotine-containing e-liquids out of reach of children and pets.